Description

MAX ALARM DISC LOCK

Disc lock with 120 dB alarm system.

• ON/OFF system
• Made of heat-treated monoblock stainless steel
• Light weight and high resistant
• Ø 14 mm double locking pin
• Anti-picking and anti-drill disc lock.
• 100% waterproof + rust prevention
• Batteries (1 x CR2)
• 3 keys
• 10-year warranty
• SRA approved
• Dimensions: 90x55x55 mm
• Weight: 743 g

HOW TO USE:

1. Use the Allen wrench included to remove the screw within your disc lock.
2. Remove bottom black cover
3. Pull out the mechanism using the tab.
4. Place the provided battery into the designated slot and seal it with the rubber piece.
5. Put everything back in place and tighten it again using the screw.
6. Make sure the lock is closed to enable or disable the alarm. Alarm is subject to padlock’s opening and closing
   • 1 beep = Alarm enabled
   • 2 beeps = Alarm disabled
7. The alarm confirms its activation with a prolonged and loud sound.
8. Once motion is detected, the preliminary warning is followed by activation of its 120 dB alarm.
9. It sounds for a few long seconds and, if it detects no further movement, it stops to save energy.
10. If it keeps detecting motion, it will keep beeping to scare off burglars.