Description

Spray Paint – MoTip Spray-Putty 400 ml

QUICK-DRYING SPRAY SPRAYER

MoTip Spray-Putty is a putty in spray form that has been developed to fill in minor irregularities such as scratches and marks after sanding, so that the surface is smoothed and prepared for the subsequent varnishing. The filler can be used on both treated and untreated surfaces of wood, metal and aluminum, and the good filling properties as well as excellent adhesion make it incredibly easy to work with. MoTip Spray-Putty can be easily sanded in both wet and dry conditions and has practical rust-preventing properties.

If you have had some unfortunate scratches on your scooter that you need to have fixed, then the MoTip Spray-Putty may very well be your friend in need. The filler gives you a durable and uniform surface so you have the best conditions to get a nice and shiny varnish again.

MoTip Spray-Putty must always be applied on a clean and completely dry surface. Start by shaking the MoTip Spray-Putty thoroughly before use and apply an even, thin layer from a distance of approximately 25-30 cm. Repeat as needed, being careful to shake the spray can thoroughly between each layer. When the filler has hardened, sand with 400 grit sandpaper. Temperature, humidity and the amount of Spray-Putty have an effect on the length of the drying time. It is important to always clean the nozzle when you have finished so that it does not stop. To clean the nozzle, turn the can upside down and hold the nozzle for about 5 seconds.