Description

Streamlined turn signals from TNT

The flashers are very discreet in their appearance, but are equipped with several powerful LEDs that ensure you are visible when you flash. The Crispy flashers are made to take up as little space as possible by enabling mounting right up close to the original mounting hole in the fairings or shielding of your machine, without compromising on visibility and safety, so even though the flashers are small and discreet, you get an effective set of flashers.

Because these flashers are LED illuminated, you may need to install resistors or LED compatible flasher relay when mounting the flashers.

Specifications:

• Dimensions: 39x27x25mm
• Thread type: M10
• Yellow wire: Plus.
• Black wire: Stel.
• Lightly tinted glass.
• CE approved.
• Special connector type, modification may be required.

Note: As mentioned above, if you switch from regular incandescent turn signals to LED, you need to compensate for the lack of resistance that occurs when installing LED turn signals. This can be done by adding resistors to the wiring harness or by replacing your regular turn signal relay with an LED relay.