Description

Stage6 Streetrace 50ccm

The Stage6 Streetrace 50ccm cylinder kit is made of cast iron and the design of the flushing channels and exhaust port is very similar to e.g. DR Racing Parts 50ccm. This means that here too you get a quality kit with respectable power, despite its modest cubic capacity.

Just like its 70cc big brother, Stage6 has deliberately not written its name on the cylinder, but simply written “49ccm” so it can be confused with the original cylinder. As mentioned, the cylinder is made of cast iron and we therefore recommend a run-in of around 200km. For this cylinder you must use a spark plug with a short thread, we recommend an NGK BR8HS. The kit is delivered complete incl. gaskets, piston rings etc.

Note: This cylinder kit is with ø10mm cross pin.

Note: The cylinder cannot be installed on models from 2003-> unless the restriction in the engine block is removed. If the cylinder is fitted, it is no longer possible to use the original, or other Euro2, exhausts. Both apply to models from 2003->. This does NOT apply to PGO engines.