Description

Stage6 R/T MkII 70cc exhaust

The Stage6 R/T MkII exhaust is developed for use with the Stage6 R/T 70cc cylinder kit and therefore matches it in all respects. In pursuit of a different look and to optimize the flow inside, the 0.8mm sheet metal cones have been welded to the outside of the exhaust. The included silencer has a carbon fiber surface and is attached to the exhaust using a spring.

The evolution from the previous version to this MkII is characterized by, for example For example, the exhaust now has a removable stinger and can be equipped with a restrictor plate if desired, and a separate flange can now be purchased so that the exhaust is not exclusively suitable for the Stage6 R/T cylinder kit, but can be physically mounted on other cylinders for Hiper2 engines. However, this requires the installation of a rod85 or rod90 crank in order for the front pipe of the Stage6 R/T MkII exhaust to clear the engine mount.

NOTE: No flange is included for the exhaust. Use the flange included with the Stage6 R/T cylinder kit or purchase one for other cylinders separately, but requires rod85 or rod90 crank.

Note: The exhaust has a thin layer of clear lacquer from the factory, but to ensure that it does not tarnish, we recommend that you regularly maintain the protective layer yourself.